LGB 24771 Mode D'emploi page 10

Controllable Functions
Lighting
Smoke generator on/off
SERVICE
Lubrication
The axle bearings and the side rod ends should be lubrica-
ted occasionally with a small amount of Märklin-Öl (7149).
1
Replacing the light bulbs
Front light: Carefully pry the lens away from the lantern.
Using tweezers, remove and replace the bulb. Reassemble.
Cab light: Using tweezers, remove and replace the bulb.
Replacing the smoke generator (Fig. 3 & 4)
– Pull the safety cover out of the smoke stack (Fig. 3).
– Use pliers or tweezers to pull the old smoke generator out
of the stack (Fig. 4).
– Cut the wires to the old generator and attach them to the
replacement generator.
– Insulate the connections and push the replacement
generator into the stack.
– Reassemble.
9