Human Touch Novo XT Manuel D'utilisation Et D'entretien page 6

take control
THE STATUS SCREEN DISPLAYS DURING YOUR MASSAGE, PROVIDING
A QUICK REFERENCE FOR THE FOLLOWING INFORMATION
Speed — the current back massage speed
Cloud TCH — the current Cloud Touch intensity
Width — the current back massage width
Calf SPD — the current foot/calf massage speed
Illustrates the areas
currently being massaged
Stop/Power/Restore — Press this button:
• To power on the remote.
• Then select STOP to stop your massage
immediately.
• Select POWER OFF, then select RESTORE
to return the chair to the upright position
before exiting.
Menu — Displays the main menu.
Use the up/down/left/right buttons to
navigate the screen; press OK to select.
Legs — Press and hold to raise
or lower the footrest.
Legs Extend — Press and hold to
extend the footrest.
NOTE: During Auto Programs, your
leg length is automatically measured
and the program adjusted accordingly.
If the chair is not in use for three minutes the controller
display automatically shuts down. Press the Stop/Power
button to resume use. The chair resets all settings to the
default position.
humantouch.com
The amount of time remaining
in the current massage session
The massage techniques currently
in progress
Indicates if heat is on
Indicates if chair is in ZeroG position
Indicates if chair is connected to a
Bluetooth device
Position — Use to move the massage
rollers to the desired position when
enjoying a Zone or Spot massage. See
Using Manual Massage Modes on
page 10 for more information.
Auto — Displays the Auto Programs menu.
When an auto program is running, press
to toggle among the auto programs. The
active program displays at the top of the
status screen.
Back — Press and hold to recline or
incline the backrest.
ZeroG — Press and hold to automatically
®
position the chair in ZeroG mode, raising
your feet above your heart for maximum
spine relief.
Legs Retract — Press and hold
to retract the footrest.
If you use your massage chair for more
than an hour continuously it may overheat
and shut down; this is normal. Allow it to
cool for 30 minutes before resuming use.
8 8
Choose from 34 Auto Programs based on your current need, or configure your own massage
using the Manual Massage screens. You can also control the Cloud Touch air massage
intensity. For an ultra-soothing massage, turn the heat on and connect your smartphone or
tablet to the chair's speaker system.
USING THE AUTO PROGRAMS
1. From the main menu, select AUTO to display the Auto Programs menu.
AWAKE - Gets you up and moving for the day.
ENERGIZE - Soothes and STRETCHES you from head to toe.
PERFORMANCE
- Delivers an intense Cloud Touch air massage.
RECOVERY - Focuses on relieving tension in the neck and shoulders.
UPPER BACK - Focuses the massage on your upper back.
LOWER BACK - Focuses the massage on your lower back.
DEMO - Demonstrates all of the chairs massage techniques.
2. Before selecting an auto massage program, make sure your feet are pressed firmly against the bottom
of the foot/calf massage wells. Shortly after the massage begins, the foot/calf massager extends/
retracts to measure the length of your legs. The program then uses this information to tailor your
massage to your leg length. If your feet are not pressed firmly against the bottom of the foot/calf
massager, your leg length cannot be measured, and the program will not function properly (for
example, the stretch function will not activate).
3. Select the desired auto program group to display the program list. The primary program displays
at the top of the group, followed by variations of that program.
SHIATSU
- A varied massage, using soft, medium and aggressive intensities.
SWEDISH - A moderate massage using soft to medium intensity.
SPORTS - A massage that starts soft and increases to an aggressive intensity.
THAI - A massage that begins aggressively and decreases to a soft intensity.
NOTE: The Energize auto program massage style also includes an independent Stretch program.
4. Select the desired program. The Set Shoulder Height screen displays.
5. Set the shoulder height to the desired position, ranging from small (1) to large (9). Your massage
will automatically be mapped to the selected shoulder height, for maximum effectiveness.
6. Sit back and enjoy a world-class massage!
NOTE: You can access the Set Shoulder Height screen during any massage by pressing one of the
Position buttons on the remote control.
9