Filling Aid - STORZ & BICKEL Mighty Mode D'emploi

8 . F I L L I N G T H E F I L L I N G C H A M B E R
Take care that the Screens are
not obstructed with plant ma-
terial. To guarantee optimal
results, we recommend cleaning the
Screens after each vaporization cycle
with the enclosed Cleaning Brush.
The upper Screen especially can be-
come clogged with plant material and
so make inhaling difficult. In this case,
remove the Screen as described in
Chapter 10. "Disassembling, cleaning
and assembling", page 57 and clean
or insert a new Screen.
Then re-mount the Cooling Unit by ro-
tating it clockwise through 90°.
As soon as the lower Filling Chamber
Screen is clogged or shows depos-
its, a cleaning of the Filling Chamber
is needed. For that, please firstly re-
move the lower Screen as described
in Chapter 10.3. "Removal of the lower
Filling Chamber Screen", page 60
and clean the Filling Chamber with
a cotton stick that has been soaked
in alcohol. Please make sure that no
alcohol drops into the inner of the de-
vice. After cleaning, a new Screen is to
be inserted.

8.1. Filling Aid

The Filling Aid supplied with the unit
makes filling the Filling Chamber an
easy and clean operation and serves
as a magazine for transporting and
storing plant material already ground
in the Herb Mill.
To fill the Filling Aid, remove the up-
per cap and fill the bowl incl. plug with
ground plant material. Replace the up-
per cap and close it.
Filled Filling Aid
(upper cap removed)
54
Upper
Cap
Plug
Bowl
Lower
Cap