Velleman WB039 Consignes De Montage page 4

EN
1. Installing the Pole and Desk Clamp Assembly
2. Installation to Desk
2a. Edge Installation
• Determine the approximate location for mounting, keeping in mind display size, height adjustment and
pitch/swivel requirements.
• Slip the desk mount assembly over the edge of the desk so that the clamp makes full contact with the desk edge.
• Turn the knob to adjust the clamp to the edge of the desk and secure it tightly.
4 1
P-A
tighten
Note: min. desktop thickness = 10 mm
max. desktop thickness = 90 mm
adjustable height
collar
tighten
P-A
loosen
P-A
tighten