Operating Modes - turck TS400/500 Série Mode D'emploi

Temperature Sensor Series TS...

8 Operating modes

Run mode – Standard operation
The sensor detects the temperature and acts in accordance to the re-
quired switching or analogue performance, meeting the ex-factory or
customer-specifi c parameters. The display indicates the temperature,
the selected unit of pressure and the status of the switching outputs.
Menu mode - Parameters and associated values
Upon a push of the mode button, the display assumes the menu mode.
In this mode all parameters and the associated values can be read. To
view the values associated with a parameter, simply press the "Set" but-
ton for a short moment. The adjustment options can be taken from the
table under point 10.
Programming mode - Adjustment of the parameter values
The programming mode is accessed via the menu mode. In this mode,
all adjustable parameters can be modifi ed. As described under the
menu mode, it is possible to view the value programmed for a cer-
tain parameter via a short press of the "Set" button. In order to modify
this value, the "Set" button must be pressed and held until the display
stops fl ashing. Now it is possible to re-adjust the value via the "Set" and
"Mode" button. In the programming mode, the "Set" and "Mode" button
can also be used as an "UP" and "Down" button. The adjustment op-
tions can be taken from the table under point 10.
8
/0208 Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com