Introduction; Safety Information; General Information; Correct Usage To The Intended Purpose - turck TS400/500 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Temperature Sensor Series TS...

1 Introduction

Dear Customer!
We would like to thank you for opting for a product from our company
and would like to confi rm you in your decision.
The sensors can be programmed on-site for various different applica-
tions.
In order to be able to fully utilise the wide range of functions, we kindly
request you to observe the following issues:
Any person entrusted with the set-up or operation of the device, must
have read and understood this operation manual, in particular all safety
notes.

2 Safety information

2.1 General information

In order to ensure safe operation, the device may only be operated in
accordance to the specifi cations stated in this operation manual. Fur-
ther it is required to observe all legal and safety regulations applicable to
the specifi c application.
This also applies to the usage of accessories.
2.2

Correct usage to the intended purpose

These devices are designed for indication and monitoring of process
variables. All other forms of usage do not comply with the intended pur-
pose.
These sensors may not be used as the sole means for prevention of
dangerous machine and system conditions. Machines and systems
must be constructed in such a way, that faulty states cannot lead to a
dangerous situation for the operating staff (e.g. due to independent limit
switches, mechanical interlocking devices, etc.).
2
/0208
Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com

Publicité

Table des Matières
loading

Table des Matières