Qualifi Ed Staff; Remaining Hazards; Ce Conformity - turck TS400/500 Série Mode D'emploi

2.3 Qualifi ed staff
The devices may only be installed, connected, set-up and operated by
qualifi ed staff and in compliance with the technical specifi cations.
Qualifi ed staff is defi ned as persons, who are familiar with set-up,
mounting, start-up and operation of this device and who possess a
recognized degree or certifi cate of appropriate professional training.
2.4

Remaining hazards

These sensors employ state-of-the-art technology and are safe to oper-
ate. However, if they are installed and operated by unqualifi ed staff, an
element of risk remains.
In this manual the remaining risks are marked by the following symbol:
This symbol is posted where there is a risk of serious
!
injury or death or the damage of material and property,
if the warning is ignored
2.5

CE conformity

The device accords to EN 61326 and may only be used in industrial
environments.
The conformity declaration can be downloaded from the Internet under
www.turck.com
Hans Turck GmbH & Co.KG • D–45466 Mülheim an der Ruhr • www.turck.com
3
/0208