Operation; Gain Control; White Balance; Maintenance - Cuda surgical ELITE SYC-410FS Manuel D'utilisation Et D'entretien

5.

OPERATION

Attach power cord to camera adapter. The camera system is ready to go. When
required, the user can alter the picture quality by utilizing the following steps.
5.1

Gain Control

When more sensitivity is required you can adjust the gain by turning the
gain control screw while observing the picture. Increasing the gain will also
increase the noise. We recommend you increase the lighting to obtain a
good picture.
5.2

White Balance

A white balance adjustment is necessary to obtain a picture with the
correct color tone. This camera allows you to select the white balance
adjustment. Point camera at a white object and press the AWB button on
the back of the camera this will set the white balance.

6. MAINTENANCE

Storing the headlamp system in a safe place will prolong the life of the unit.
Fiber optic cables are an optical instrument.
The following guidelines will help in sustaining the headlamp systems useful life:
• Forming the cable in sharp angles and kinks should be avoided
whenever possible. The internal fibers are made of glass, which will
break under these conditions.
• Keep the optical faces of the cable and camera lens from touching hard
surfaces, which may cause scratches on the surface.
surface will diminish the light output.
• When cuts or punctures are visible in the silicone tubing, the cable is no
longer safe to use, and should be taken out of service immediately.
LIT-092 CUDA ELITE
®
(English)
Scratches on the
Rev. E
Page 7 of 45