Camera Control And Functions - Cuda surgical ELITE SYC-410FS Manuel D'utilisation Et D'entretien

4. CAMERA CONTROLS AND FUNCTIONS
Information
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can generate radio frequency and, if not installed and used in
accordance with the instrument manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Camera control unit
1
No. Name
1 Camera terminal
2 Gain adjust
3 AWB switch
4 DC in 12V terminal
5 S-VIDEO terminal
6 BNC VIDEO terminal
7 Remote terminal
LIT-092 CUDA
(English)
Function
Connects to the camera head.
Turning this screw will increase or decrease the gain.
Sets the white balance.
Accepts the DC power supply (12V)
Connects terminal to S input of a monitor or a VCR, or
recording system.
Connects terminal to the video input terminal of a monitor or
a VCR.
Controls the functions via a serial port.
ELITE
®
5
3
2
4
6
7
Rev. E
Page 6 of 45