Technical Data - Jotul F 400 Manuel D'installation Et Données Techniques

ENGliSh
Table of contents
Installation manual with technical data
1.0 Relationship to the authorities ..................16
2.0 Technical data ..............................................16
3.0 Installation ................................................. 17
4.0 Service ..........................................................19
5.0 Optional Equipment ...................................19
Figures ..................................................................40
Table of contents
General use and maintenance manual
6.0 Safety precautions
7.0 Choice of fuel
8.0 Use
9.0 Maintenance
10.0 Operational problems - troubleshooting
Product:
Jøtul
Room heater fired by solid fuel
Standard
:
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
Emission of CO in combustion products :
Flue gas temperature :
Nominal heat output
:
Efficiency :
Operation range :
Fuel type :
Operational type :
The appliance can be used in a shared flue.
Country Classification Certificate/ Approved by
standard
Norway Klasse II
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
16
On all our products there is
a label indicating the serial
number and year. Write this
number in the place indicated in
the installation instructions.
Always quote this serial number
when contacting your retailer
or Jøtul.
Serial no.
1.0 Relationship to the
authorities
Installation of a fireplace must be according to local codes and
regulations in each country.
All local regulations, including those which refer to national
and European standards, must be observed when installing the
product.
Both an installation manual with technical data and a manual
on general use and maintenance are enclosed with the product.
The installation can only be used after it has been inspected by
a qualified inspector.
A name plate of heat-resistant material is affixed to the
product. This contains information about identification and
documentation for the product.

2.0 Technical data

Material:
Finish:
Fuel:
Log length, max.:
Flue outlet:
Flue pipe dimension:
Approx. weight:
Optional extras:
Dimensions, distances etc. See fig. 1
Technical data according to EN 13240
Nominal heat output:
Flue gas mass flow:
Recommended chimney draught:
Efficiency:
CO emission (13% O ):
2
Flue gas temperature:
Operational type:
Intermittent combustion in this context means normal use of the
fireplace, i.e. fuel is added as soon as the fuel has burnt down to
a suitable amount of embers.
Cast iron
Black paint and enamel
Wood
50 cm
Top/rear
Ø150 mm, 177 cm cross section
2
158 kg
Short legs(155 cm), heat shield,
Connecting pipe for outdoor
ventilation
7,0 kW
6,6 g/sec
12 Pa
84%@7,2 kW
0.12%
230 C
o
Intermittent