Label Format; Data Bits; To Choose U.wt Recomputing - Giropes BAXTRAN BAP Manuel D'utilisation

Then press the

5.4 LABEL FORMAT

The display show as below:
Press or
Press the or
Then press the

5.5 DATA BITS

The display show as below:
Press or
Press the or
(bit.e7) or 8 (bit.n8)). (Default: 8)
bit.e7: data bits 7, even parity bit
bit.n8: data bits 8, no parity bit
Then press the

5.6 TO CHOOSE U.WT RECOMPUTING

The display show as below:
AC Y
key to confirm and move to next setting or press the
key to move to last setting or next setting; or press
key to choose the desired baud rate: "1200" , "2400" , "4800" or "9600" . (Default: 9600)
key to confirm and move to next setting or press the
key to move to last setting or next setting; or press
key to choose the data bits to be 7
key to confirm and move to next setting or press the
USER MANUAL BAP
key to move to next setting.
key to enter into current setting.
key to move to next setting.
key to enter into current setting.
key to move to next setting.
EN EN
15