Using Quicktrolleysystem - Handicare RiseAtlas450M Mode D'emploi

Using QuickTrolleySystem

Ensure that the emergency stop is activated and place the lift unit in the rail by inserting the QuickTrolley T-bracket into
the trolley. Then rotate the lift unit 90 degrees to lock the QuickTrolleyReleaseBracket into the trolley, picture 1-4 below.
Ensure that the lift unit slides in place and that it can be moved along the rail.
Note! The ceiling lift unit can only be mounted in and out at the symbol for Quick Trolley (sticker on the rail).
Plug in the cabel from the trolley at the top of the lift unit, picture 5.
Picture 1-4; Mounting lift unit to the rail using quick trolley system
Picture 5; Trolley cable
plugged in
11