Error Messages; Errormessage - Batavus Emotion Smart Manuel D'instructions

2.3 Switching from km/h to mph
Press the A button and the B button simultaneously for 3 seconds to switch
from km/h to mph (miles).
This choice will be retained as soon as the system is restarted.
2.4

Error messages

In the event of a fault, an error message may appear on the display.
This is indicated by the flashing of the speed indicator, and the
instead of the speed, an error message is displayed.
For an overview of error messages, see page 29.
A
B
28
Error message overview
Error message description
33 Engine fault
35 Engine fault Contact the dealer
36 Engine fault Contact the dealer
37 Motor controller Motor controller too hot, let it cool down.
warning
40 Engine warning Motor too hot, let it cool down.
41 Speed error Check the speed sensor (see 2.5).
48 Engine fault Contact the dealer
70 Communication Check cabling or contact the dealer
error
71 Display error Contact the dealer
actie
Check engine cabling or contact your dealer.
29