Publicité
Les langues disponibles
Les langues disponibles
1.2
Batterypack and charger
A
battery pack
B
state of charge display
C
docking station contact point
D
charging point
E
charger
F
indicator
G
chargerplug
H
lock
I
key
J
docking station
24
2
Sire-e Display with steering wheel control
2.1
Explanation of the use of control buttons
A
Turning the system on and off
B
Parking aid / boost function
Support - (arrow down)
C
Support + (arrow up)
D
E
Light
The e-bike switches off automatically if it has not
been used for more than 10 minutes.
A. Switching the system on and off
Use the A button to turn the system on and off.
You can turn the system on and off at any time, even while cycling. To switch
on, press the A button for 1 second. To switch off, press the A button for
three seconds. When the system is switched on, the lighting is switched on
immediately and the support is in position 0.
Position 0 does not provide any support, Position 1 very moderate support to
position 5 provides maximum support.
B. Parking aid
For example, if you take the bike out of a basement, the parking aid can give
you extra support so that you don't have to push the bike up under your own
steam.
If you want to use the parking assistance option, press and hold the B
while walking next to the bike.
Without pedalling, the parking aid provides support up to ±4 km/hour. When
using the parking aid, all 5 support indicators light up.
Boost function
You can use the boost function when driving off. In addition, the boost func-
tion can give the support an extra boost when cycling. This is useful when,
for example, you overtake someone or cycle up a hill. The impulse is most
strongly felt at a low level of support.
The boost function can be activated by pressing button B.
and put pressure on the pedals. When you release the B button or stop ped-
aling, the boost function stops.
E
D
C
B
25
A
Publicité
Chapitres
