Adjusting The Beverage Quantity - SEVERIN Fino Multi KA4566 Mode D'emploi

7. Then, remove your cup from the appliance, fold the bracket closure
upwards and remove the strainer support for cleaning.
8. Ready! Enjoy your co ee!

Adjusting the beverage quantity

The beverage quantity for co ee pads can be adjusted and saved in 5
interval steps (also see table in section „3.4 Beverage quantity, brewing
temperature and steep time – overview").
1. Insert the strainer support for co ee pads into the appliance as
described above.
2. Press and hold the Start/Stop button (H.5)
elements (H.1) and (H.4)
3. Through repeated short pressing of the Start/Stop button (H.5)
can increase the beverage quantity by one interval step, respectively. If
the maximum beverage quantity has been reached and you press the
button again, setting starts again with the rst interval step.
4. When you have reached the desired setting, press and hold the Start/
Stop button (H.5)
extinguish. Now the setting is saved.
Note: If no button is pressed within 30 seconds, the settings are not
!
changed and the programme returns to stand-by mode.
light up.
until the display elements (H.1)
until the display
you
and (H.4)
11
EN