GRAUPNER ROMMEL Instructions D'utilisation page 16

Maiden run
Charge up all the batteries and test the model's working systems one by one. Check that all the parts which
are not permanently attached are firmly seated. Now you are ready for the boat's maiden run. Keep its speed
low at first, and give yourself plenty of time to become familiar with the vessel's handling. The model has
quite a turn of speed, its minimum turning radius is large and its braking distance long. For this reason it
should only be operated on a fairly large stretch of water. Avoid running the boat too far from the bank.
We hope you have many hours of pleasure running your model of the ROMMEL.
Replacement part
Order No. 2192.6
You will also need the following items (not included in the set)
Order No. Description
4729 X-408 ECO-SPORT SYSTEM FM RC set, 40 MHz
or
4714 X-412 FM RC set, 40 MHz
We also recommend any Graupner iFS computer system, e.g. mx-16 iFS (Order No. 23000).
2875 NAVY V40R speed controller
2490.7 GM Power-Pack 3600 NiMH drive battery, 8.4 V / 3.6 Ah (four required)
3061 G2 parallel lead (three required)
2989 G2 connector system for the speed controller and batteries
3368 Velcro tape
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! Liability for printing errors excluded. We reserve the right to introduce modifications. Sous réserve de
modifications! Nous ne sommes pas responsables d'éventuelles erreurs d'impression!
Replacement propeller set (2 off)
#0059841 07/2009
16