Joystick Setting; Osd Menu Startup; Osd Menu Table - Eneo MED-62V2812M0B Mode D'emploi

generates only one video output for both main video output and sub-out. It takes 3~5
seconds when video format is changing. The default DIP SWITCH setting is HD-TVI
mode.

Joystick setting

Switching video format is available by Video format joystick. If you want to set the HD
video format, set the DIP Switch to HD mode first. Then set the one of HD Video format by
joystick. The default setting is TVI mode.
1. TVI mode (Up ▲) : Moving up direction for about 3 seconds to TVI mode.
2. CVBS (Down ▼) : Moving down direction for about 3 seconds to CVBS.
3. AHD (Left ◄) : Moving left direction for about 3 seconds to AHD.
4. CVI mode (Right ►) : Moving right direction for about 3 seconds to CVI mode.

OSD menu startup

Press the 'OSD menu SET key' down to access the setup menu mode.
• EXIT : Enters 'EXIT' menu.
• RETURN : Returns to the previous menu.
• DEFAULT : Restores to factory default.

OSD menu table

MENU SUB MENU
DC
LENS
MANUAL
FOCUS ASSIST DN DWELL
CONFIGURATION
MODE
IRIS SPEED
INDOOOR, OUTDOOR
EN
11