Symbols Used In The Instructions; General Safety Directions For Power Tools - Deltafox DG-ECS 7120 T Traduction De La Notice D'utilisation Originale

GB
Graphical symbol on the blade:
Direction of travel of the saw
chain
Graphical symbol on the oil tank cap:
Saw chain lubrication.
Graphical symbol on the fixing screw
for the chain sprocket cover:
OPEN
CLOSE
s.l.
A full tank will last for approx.
10 minutes of continuous opera-
tion.
Symbols used in the
instructions
Caution: This is how to avoid
accidents and injuries by an
electric shock:
Hazard symbols with informa-
tion on prevention of personal
injury and property damage.
Notice symbol with information on
how to handle the device properly.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm / damage.
Wear protective gloves.
88
General Safety Directions for
Power Tools
Before you do any work with the
electric pruner, make yourself
familiar with all operating parts.
Practise using the saw (sawing
logs on a sawhorse) and get an
experienced user or a specialist to
explain to you the function of the
saw, the way of working, the tech-
niques of sawing and the personal
protection equipment.
RESIDUAL RISKS
Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
WARNING! Read all safety direc-
tions and instructions. Omis-
sions in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.
Retain all safety directions and instruc-
tions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.