General Description; Delivery Contents; Summary; Function Description - Deltafox DG-ECS 7120 T Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 45
liable for damages, which were caused
through use in applications for which it
was not designed, or incorrect operation.

General description

The illustrations can be found on
pages 2-4.

Delivery contents

Carefully unpack the appliance and check
that it is complete:
-
Electric pole-mounted pruner
-
Telescopic handle
-
Blade
-
Saw chain
-
Round handle
-
Chain guard
-
Shoulder strap
-
Allen key
-
Screw driver
-
Oil bottle with 60 ml bio chain oil
(special chain oil)
-
Instruction Manual
Dispose of the packaging material cor-
rectly.
Caution! The saw can re-oil.
Please note that the saw re-oils after
use and oil may leak out if it is stored on
its side or on the head. This is a normal
process due to the necessary ventila-
tion opening on the upper edge of the
tank and does not constitute a reason for
complaint. As each saw is checked dur-
ing production and tested with oil, a small
residue may be in the tank despite drain-
ing, which may slightly dirty the housing
with oil in transit. Please clean the hous-
ing with a cloth.

Summary

1 Direction star
2 Saw chain
3 Blade (guide rail)
4 Chain adjustment ring
5 Blade fixing screw
6 Chain wheel cover
7 Locking button for angle adjust-
ment
8 Screw sleeve telescopic arm
9 Quick release for telescopic
handle
10 Telescopic handle
11 Round handle
12 Carrying eyelet for shoulder
strap
13 Operating handle
14 On/off switch
15 Relief
16 Start lock (not visible)
17 Claw stop
18 Oil tank cap
19 Oil level inspection window
20 Chain guard
21 Shoulder strap
22 Oil bottle with 60 ml bio chain oil
(special chain oil)
23 Allen key
29 Device attachmen
31 Mains plug

Function description

The
electric pole-mounted pruner
electric motor as the drive. Operation is
with the on/off switch on the operating
handle.
The revolving saw chain is guided over a
blade (guide rail) and performs the cutting
work.
The device is equipped with a bendable
device head with a chain quick-tensioning
system.
GB
has an
85

Publicité

Table des Matières
loading

Table des Matières