Connections - GOK 261230 Instructions De Montage Et D'utilisation

Cylinder system with automatic changeover valve
• withdrawal is alternating, cylinders can be replaced while the system is operating
• safety switch: an integrated safety device prevents gas escaping when the cylinder is
replaced
• optional: design with electronic remote display (operation/spare) including remote display
(red/green) and transformer
Delivery scope
• high pressure hoses
• the corresponding number of pipes, adapters, screw connections, fastening parts and
support rails
• manual changeover unit or automatic changeover valve
• low pressure regulator with safety overpressure shut-off valve (OPSO) and pressure relief
valve PRV with breather or
Low pressure regulator type EN61-DS with two stage safety pressure regulating device
"S2SR" (Safety Two Stages Regulator) and test device.
Test device for the leak testing of LPG systems without the removal of the pressure
regulator
• The outlet connector is fitted as standard with an adapter for connection to the 8mm piping

CONNECTIONS

Outlet,
optional
Alternatively, other connections can be obtained from the manufacturer on
request.
Artikel-Nr. 05 075 51 e
Trading name and dimensions
acc. to standard
M thread connection for GF
• Y.6 = Thread W 21.8 x 1/14 lh
Compression fitting RVS
• H.9 = RVS 10
• H.8 = compr. fit 15
Pipe socket
• Pipe socket 12 mm
Installation notes
For connection to
GF connection G.4
or Kombi G.5
17 / 36