Poulan Pro PPB4020M Manuel D'instructions page 7

reduce the risk of serious personal injury.
• When battery pack is not in use, keep it
away from other metal objects like: paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause sparks, burns, or a fire.
• Always remove battery pack from your tool
when you are assembling parts, making
adjustments, cleaning, or when not in
use. Removing battery pack will prevent
accidental starting that could cause serious
personal injury.
• Always remove battery pack before storing
the device. When battery becomes fully
charged, unplug the charger from the power
supply and remove the battery pack from
the charger.
• Always wear eye protection with side shields
marked to comply with ANSI Z87.1, along
with hearing protection. Failure to do so
could result in objects being thrown into your
eyes and other possible serious injuries.
• Keep battery pack dry, clean, and free from
oil and grease. Always use a clean cloth
when cleaning. Never use brake fluids,
gasoline, petroleum-based products, or any
solvents to clean battery pack.
PROPER CARE FOR BATTERY
Off-season storage
To obtain the longest possible battery life, we
suggest the following:
• Remove the battery pack from the charger
once it is fully charged and ready for use.
• For battery pack storage longer than 30
days:
• Store the battery pack where the
temperature is below 80°F and away from
moisture.
• Store battery packs in a 30%-50% charged
condition.
• Every two months of storage, charge the
pack as normal.
CHARGER SAFETY RULES
• Charge the mower battery in a dry area
that is protected from the weather. Do not
expose the mower or the charger to rain.
Do not charge the battery in a wet location.
Operate the battery charger in temperatures
between 45° and 104°F. In order to reduce
the risk of electric shock, use only the
SAFETY RULES
charger that is provided by the manufacturer
to charge the battery.
• Do not abuse the charge cord. Never carry
the charger by the cord. Do not disconnect
the charger from the outlet by pulling the
charger cord.
• Do not use a damaged charger. Replace the
charger cords or the charger immediately.
• Keep the mower and the charger away from
water, heat sources (radiators, heaters,
stoves, etc.), flames, and chemicals.
• Make sure the battery pack is secured in the
charger before beginning operation.
• The battery pack will become slightly warm
to the touch while charging. This is normal
and does not indicate a problem.
• Do not place the charger and battery pack
in an area of extreme heat or cold. They will
work best at normal room temperature.
• When batteries become fully charged,
unplug the charger from the power supply
and remove the battery pack.
When transporting or servicing unit, always
remove the battery.
Some dust created by power sanding, sawing,
grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals
are:
• Lead from lead-based paints；
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from chemically
treated lumber.
Your risk of exposure to these chemicals
varies depending on how often you do this
type of work. To reduce your exposure to
these chemicals, work in a well-ventilated
area, and work with approved safety
equipment, such as dust masks that are
specially designed to filter out microscopic
particles.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
6
WARNING:
WARNING:
(PROPOSITION 65)