Poulan Pro PPB4020M Manuel D'instructions page 9

Loosen
Tighten
1
MULCH PLUG INSTALLATION
(FOR MULCHING OPERATION)
NOTE: Do not install the grass catcher when
using the mulch plug.
• Remove battery pack.
• Lift and hold the rear discharge door (1).
• Grasp the mulching plug (2) by its handle
and insert it at a slight angle, as shown.
• Push the mulching plug securely into place.
• Lower the rear discharge door.
• Reinstall battery pack when you are ready
to mow.
2
GRASS CATCHER INSTALLATION
(FOR REAR BAGGING OPERATION)
NOTE: Do not install mulch plug when using
the grass catcher.
• Remove battery pack.
• Lift the rear discharge door (1).
• Lift the grass catcher by its handle (2) and
place under the rear discharge door so
that the hooks (3) on the grass catcher
are seated onto the slots (4) on the mower
housing.
• Release the rear discharge door.
• Reinstall battery pack when you are ready
to mow.
ASSEMBLY
2
1
1
4
4
8
2
3
3