Cleaning - Bosch TES 503 Serie Notice D'utilisation

Masquer les pouces Voir aussi pour TES 503 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
N.B.: If the water ilter is activated, the dis­
play will prompt you to remove the ilter and
then press the start button (10) again. Re­
move the ilter now if you have not already
done so. Press the start button (10).
Fill descaler
Press start
● Pour lukewarm water into the empty wa­
ter tank (16) up to the 0,5l mark and dis­
solve 2 Bosch descaling tablets in it.
● Press the start button (10).
Descale in progress
The descaling pro gramme will now run for
about 10 minutes.
Place container
Pull milk frother
● Place a receptacle with a capacity of at
least 0.5 litres under the outlet (6c).
● Pull the milk frother (6) to open it.
Descale in progress
The descaling pro gramme will now run for
about 12 minutes.
Clean / Fill water tank
Press start
● Rinse the water tank (16) and reill it with
fresh water up to the max mark.
● Press the start button (10).
Descale in progress
The descaling pro gramme now runs for
about 30 seconds and rinses the appliance.
Push milk frother
● Push the milk frother (6) in to close it.
Descale in progress
The descaling pro gramme now runs for
about 1 minute.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
Replace the ilter if one is being used. The
appliance has completed descaling and is
ready for use again.
Important: Wipe down the appliance using
a soft, damp cloth to immediately remove
any descaler residue. Such residue can
cause corrosion.

Cleaning

Duration: approx. 10 minutes.
If the message
Clean required!
on the display, press the
(12) for 3 seconds and then press the start
button (10).
The cleaning programme will start.
To clean the appliance before being prompted,
e
press the
off /
j
3 seconds. Then press the
(12) briely twice. Turn the upper rotary
knob (14) until
Start cleaning
in the display.
To start the cleaning procedure, press the
start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
Cleaning in progress
The appliance rinses twice.
Open drawer
● Open the drawer (4).
Fill cleaner
● Drop a Bosch cleaning tablet in the draw­
er (4) and close.
appears
e
off /
button
j
button (12) for at least
e
off /
button
j
appears
TES503.. 03/2012
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tes 503m1Tes 50351

Table des Matières