Menu Settings; Shut Off; Start Calc'n'clean; Temp - Bosch TES 503 Serie Notice D'utilisation

Masquer les pouces Voir aussi pour TES 503 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

32

Menu settings

You can adapt the appliance to your indi­
vidual needs in the menu settings.
e
1. Hold the
off /
at least 3 seconds.
e
2. Press the
off /
ly until the required menu item appears
in the display.
3. Select the required setting with the up­
per rotary knob (14).
4. Conirm by pressing the start button
(10).
To leave the menu without making any
changes, turn the rotary selector to
and press the start button (10).
You can set the following:
: Here you can set the time

Shut off

span after which the appliance automati­
cally switches off following the last drink
preparation. A time between 15 minutes
and 4 hours can be set. The default time is
1 hour, but this can be shortened to save
energy.
: Here you can set whether a water
Filter
ilter is being used. If a water ilter is not be­
ing used, turn the setting to
water ilter is being used, turn the setting to
. New water ilters have to
Activate filter
be rinsed before use (see "Water ilter" on
page 31).

Start Calc'n'Clean

grammes (
Calc'n'Clean
/
) can be selected manually
cleaning
here. Press the start button (10) and run
the selected programme (see "Service Pro­
grammes" on page 38).
: The brewing temperature (

Temp.

/
) can be set here.
middle
low
: The display language can be

Language

set here.
Robert Bosch Hausgeräte GmbH
button (12) down for
j
button (12) repeated­
j
Exit
No / Old
: The service pro­
/
descaling
high
Water hardness
setting can be adjusted on this appliance.
It is important to set the water hardness
correctly, so that the appliance indicates
accurately when the descaling programme
should be run. The factory setting for the
water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your lo­
cal water supplier.
Dip the test strip briely in water, gently
shake off any drips, and check the result
after one minute.
Level
German (°dH)
1
2
3
4
. If a
/
: The water hardness
Water hardness
French (°fH)
1­7
8­14
14­25
15­21
26­38
22­30
39­54
en
1­13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tes 503m1Tes 50351

Table des Matières