Maintenance; Scheduled Maintenance Table; Machine Working Hour Check; Battery Charging - Triple S SSS Bearcat 20TD Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE

The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions,
which are to be defined by the person in charge of the maintenance.
WARNING!
The procedures must be performed with the machine off and the battery disconnected.
Moreover, read carefully the instructions in Safety chapter before performing any maintenance procedure.
All scheduled or extraordinary maintenance procedures must be performed by qualified personnel, or by an authorised Service
Center.
This Manual describes only the easiest and most common maintenance procedures.
For other maintenance procedures shown in the Scheduled Maintenance Table, refer to the Service Manual that can be consulted
at any Service Center.

SCHEDULED MAINTENANCE TABLE

Procedure

Battery charging

Squeegee cleaning

Pad cleaning
Tank and vacuum grid with float cleaning, and cover gasket check

Squeegee blade check and replacement

Solution filter cleaning
Vacuum system motor cleaning
WET battery fluid level check
Screw and nut tightening check
Pad motor carbon brush check or replacement
Vacuum system motor carbon brush check or replacement
Drive system motor carbon brush check or replacement
(1) And after the first 8 working hours.
(2) This maintenance procedure must be performed by TRIPLE S authorised Service Center.

MACHINE WORKING HOUR CHECK

(Only if the machine is equipped with hour counter)
1.
Turn the ignition key (60) to "I".
2.
Press the vacuum switch (53) and read on the hour counter (59) the total number of working hours (scrubbing/drying)
performed by the machine.
3.
Press the vacuum switch (53) again.
4.
Turn the ignition key (60) to "0".
05/2015
INSTRUCTIONS FOR USE
Daily, after using
Weekly
the machine
9100001264 - SSS Bearcat 20TD
ENGLISH
Every six
Yearly
months
(1)
(2)
(2)
(2)
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

86016

Table des Matières