STEP 8:
Push the primer ball three times.
Wait 3 seconds between each push.
Note: in cold weather push 5 times.
For engine details see engine manual.
STEP 9:
Pull the starter handle.
If the engine fails to start after
3 pulls, squeeze the trigger gun to
release pressure, and repeat step.
High / Low pressure nozzle
This nozzle features four positions. The
high setting (+) provides a steady pow-
erful high pressure spray pattern, for
general cleaning. The low setting (-)
creates a low presure spray pattern.
Note: Detergent is applied with the noz-
zle set at low pressure.
After pulling backwards to high pres-
sure, turn wand left or right to change
the spray pattern between point jet and
flat jet.
USING THE ACCESSORIES
WARNING
To avoid serious injury never point
spray nozzle at yourself, other per-
sons or animals.
7
English