Apex XT Auto Mode D'emploi page 12

XT Auto/ English
(5) Maximum Pressure (only APAP mode)
"MENU"
Press
setting displayed in cmH
respiratory therapist or physician.
NOTE: The maximum pressure is to only be prescribed by a physician.
(6) Minimum Pressure (only APAP mode)
"MENU"
Press
setting displayed in cmH
respiratory therapist or physician.
NOTE: The minimum pressure is to only be prescribed by a physician.
(7) PVA (Pressure Variation Algorithm)
Press "MENU"
the provider, a respiratory therapist or physician. The PVA function delivers pressure relief upon
exhalation to improve comfort. If the PVA function is enabled, press
adjust the comfort level. There are 3 adjustable levels of pressure relief that you feel while
exhalation. Level 1 provides small pressure variation; and level 3 provides higher pressure
variation.
(8) Low Pressure Auto Off (only CPAP mode)
"MENU"
Press
setting is enabled and the device will be automatically turned off while detecting a large leak for
3 minutes. This setting is adjustable only by the provider, a respiratory therapist or physician.
(9) Compliance Meter
"MENU"
Press
therapy hours for the device. The compliance meter should be re-set only by the provider, a
respiratory therapist or by a physician.
(10) Alarm
"MENU"
Press
on or off. When alarm is turned on, the audible alarm will activate with warning messages
showed on the LCD display. Set alarm off for mute the audible alarm.
(11) Clock Alarm
"MENU"
Press
clock alarm on or off. When clock alarm is set on, the display will show the time on the left side.
"UP"
Press
press the start/standby button to mute the audible alarm.
(12) Clock
"MENU"
Press
current time.
button to select
O unit. Maximum pressure is adjustable only by the provider, a
2
button to select
O unit. Minimum pressure is adjustable only by the provider, a
2
button to select [c
[LOW P on/off]
button to select
button to select
[Alarm on/off]
button to select
[Clock Alarm on/off]
button to select
"DOWN"
or button to set the time to wake you up. Once the clock alarm is activated,
button to select
[Max. XX.XcmH O]
2
[Min. XX.XcmH O]
2
on/off] menu, you can view if the PVA function is enabled by
menu, you can view if the Low Pressure Auto Off
[CM XXXX.X hr]
menu, the compliance meter records the total
menu, press
menu, press
[Clock XX:XX]
menu, press
menu, you can view the current pressure
menu, you can view the current pressure
"UP"
"UP" "DOWN"
or button to set the alarm
"UP" "DOWN"
or
"UP" "DOWN"
or
9
"DOWN"
or button to
button to set the
button to set the