Introduction; Overview; Guarantee; Importance And Use Of The Manual - Comet HPP RLR 300/250 Mode D'emploi

1 INTRODUCTION

1.1 OVERVIEW

HPP S.r.l.
is a company that produces and markets positive-displacement
pumps for pumping water at high pressure.
Both research and experimentation, combined with the new application
demands in this sector, have brought about a constant and continuous
evolution of our products. The know-how we have acquired as a result will
always be the basis for meeting all customer requirements.

1.2 GUARANTEE

HPP S.r.l.
guarantees its products for a period of 3 (three) years from the
date of supply, covering the purchaser in accordance with the contract
terms. Refer to the general sales conditions for the guarantee acceptance
procedure.
NOTES
SIGNATURE
28
COMPANY STAMP
- Reproduction forbidden -

1.3 IMPORTANCE AND USE OF THE MANUAL

This use and maintenance manual is to be considered an integral part of
the machine thus it is necessary to follow these instructions:
• Read it through carefully before using the machine.
• Keep it where it will be safe and available for immediate
consultation.
• Do not destroy it.
• Do not alter it.
All the information contained in this publication is the most recently
available relative to the product at the time printing was approved.
HPP S.r.l.
reserves the right to modify this manual in the future without
prior notice.
No part of this publication may be reproduced without written
authorisation.

1.3.1 Symbols

The information linked to this symbol is of paramount importance. In fact, it
describes the operations that, if not carried out correctly, can cause harm to
people or damage the machine.
The information linked to this symbol refers to operations that require tools.
This type of work should be carried out by the relative personnel.
The information linked to this symbol refers to plumbing, water recycling,
cooling, etc., necessary for complete operation of the machine.
The information linked to this symbol refers to maintenance, lubrication of
specific points that guarantee a long life and correct operation of the
machine.
The information linked to this symbol refers to dismantling, disposal and
recycling of polluting materials – for personal health and for the environment
– which are produced when using the machine normally.
ATTENTION: the messages marked with the word "attention" describe how each
single operator or person in charge should behave, dictated by good common sense,
in order to make work safer.