Eneo ICB-62M2712M0A Guide D'installation Rapide page 11

9. Set the camera's orientation and tighten the Lock/Unlock screws using hex
wrench.
10. After all the setting, close the Opening cover and tighten it.
11. Put the sunshield to the camera unit.
Adjustment of viewing angle with a bracket
CAUTION:
Extreme care should be taken NOT to scratch the window in front
of lens. Care should be taken the cable is NOT to be damaged,
kinked or exposed in the hazardous area. Do not expose the
camera directly to a strong light source such as the sun or spot
light.
Hex wrench
EN
11