Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 4.0
UNPACKING
1.
This tool has been shipped completely assembled.
2.
Carefully remove the tool and any accessories from the box.
3.
Inspect the tool carefully to make sure no breakage or damage occurred
during shipping.
4.
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
5.
If any parts are damaged or missing, please call 1-800-665-8685
WARNING: If any parts are missing do not operate this tool until the missing parts are
replaced. Failure to do so could result in possible serious personal injury.
WARNING: Do not attempt to modify this tool or create accessories not recommended for use
with this tool. Any such alteration or modification is misuse and could result in hazardous
condition leading to possible serious personal injury.
FEATURES
Compatible with All Generic 18 Gauge Brad Nails
and staples.
1.
COMFORT-GRIP HANDLE. For increased
comfort and control.
2.
ERGONOMICALLY ENGINEERED BODY.
Rugged and Comfortable debris free,
extending tool life.
3.
NON-MARRING SAFETY CONTACT. Eliminates damage to working surface.
OPERATION
LoADING FASTENERS
1.
Connect the tool to the air source.
2.
Push down on the latch button(A). Pull
back on the inner magazine (B).
3.
Please load the fasteners with the head
of the staples facing the same direction
as the work contact element beneath
the magazine. This tool is a bottom
loading stapler!
4.
Push the inner magazine(B) forward until
latch button pops up.
WARNING: The tool may fire when it is first
connected to the air resource. Always connect the
tool to the air resource before loading fasteners
to prevent injury from unintended cycling. Always
make sure the tool's magazine is empty at the
beginning of each work session, before connecting to an air resource.
8
Fine Wire Stapler
0.417 in. (10.6 mm)
1/4 in.
5/16 in.
3/8 in.
1/2 in.
9/16 in.
Inner Magazine (B)
For technical questions call 1-800-665-8685
6 mm
0.05 in.
8 mm
(1.26 mm)
10 mm
12 mm
14 mm
Latch button (A)
8558769
0.022 in.
(0.55 mm)
Publicité
Table des Matières
