Recommended Hookup - Power Fist 8558769 Manuel D'utilisation

V 4.0

RECOMMENDED HOOKUP

1. The air compressor must be able to maintain a minimum of 60 psi when the
tool is being used. An inadequate air supply can cause a loss of power and
inconsistent driving.
2. An oiler can be used to provide oil circulation through the tool. A filter can be used to
remove liquid and solid impurities which can rust or gum up internal parts of the tool.
3. Always use air supply hoses with a minimum working pressure rating equal to or
greater than the pressure from the power source if a regulator fails, or 150 psi,
whichever is greater. Use 3/8 in. air hose for runs up to 50 feet and use 3/8 in. quick
coupler on the air hose.
4. Use a pressure regulator on the compressor, with an operating pressure of 0 to
125 psi. A pressure regulator is required to control the operating pressure of the tool
between 60 and 100 psi.
CAUTION: The air compressor must be able to maintain a minimum of 60 psi when the tool is
being used. An inadequate air supply can cause a loss of power and inconsistent driving.
WARNING: Do not connect with an air compressor which can potentially exceed 200 psi. As
tool may burst, possibly causing injury.
Quick
Coupler
Quick
connector
12
Fine Wire Stapler
Quick
Air hose
connector
Quick
Coupler
For technical questions call 1-800-665-8685
Filter
Oiler
Regulator
8558769
Compressor