Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8558769
11. Make sure the hose is free of obstructions or snags. Entangled or snarled hoses
can cause loss of balance or footing and may become damaged, resulting in
possible injury.
12. Do not overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in unexpected situations.
13. Do not attach the hose or tool to your body.
14. Attach the hose to the structure to reduce the risk of loss of balance if the hose shifts.
15. Always assume that the tool contains fasteners. Do not point the tool toward yourself
or anyone whether it contains fasteners or not.
16. Wash hands after handling. This product or its power cord may contain chemicals
known to cause cancer and birth defects or other reproductive harm.
TooL USE AND CARE
1.
Know this tool. Read manual carefully, learn its applications and limitations, as well as
the specific potential hazards related to this tool.
2.
Use only fasteners that are recommended for your models. Do not use the wrong
fasteners or load the fasteners incorrectly.
3.
Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool's operation. If damaged, have the tool serviced
before using. Many accidents are caused by poorly maintained tools.
4.
Maintain tools with care. Keep tool clean. A properly maintained tool, reduces the risk
of binding and is easier to control.
5.
Store tools out of the reach of children and other untrained people. Tools are
dangerous in the hands of untrained users.
6.
Check operation of the tool before use. Do not use the tool if the workpiece contact
mechanism is not working correctly as accidental driving of a fastener may occur.
7.
Do not use tool if trigger does not actuate properly. Any tool that cannot be controlled
with the trigger is dangerous and must be repaired.
8.
Do not force tool. Use the correct tool for your application. The correct tool will do the
job better and safer at the rate for which it is designed.
9.
Use clamps or another practical way to Secure and support the workpiece to a stable
platform. Holding a tool by hand or against the body is unstable and may lead to loss
of control.
10. Keep the tool and its handle dry, clean and free from oil and grease. Always use
a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based
products, or any strong solvents to clean your tool.
11. Do not use the tool as a hammer.
12. Never use this tool in a manner that could cause a fastener to be directed toward
anything other than the workpiece.
13. Never use gasoline or other flammable liquids to clean the tool. Never use the tool in
the presence of flammable liquids or gases. Vapors could ignite by a spark and cause
an explosion which will result in death or serious personal injury.
14. Do not remove, tamper with, or otherwise cause the trigger lock or trigger to become
inoperable. Do not operate any tool which has been modified in a like fashion. Death
or serious personal injury could result.
Visit www.princessauto.com for more information
Fine Wire Stapler
V 4.0
5
Publicité
Table des Matières
