Phoenix Mecano Alpha Colonne Notice D'assemblage page 40

1. Declaration of incorporation
2014/35/EU
Sources for the applied harmonised standards according to article 7, paragraph 2:
EN 55014-1:2006-12
EN 55014-2/A1:2001-12
EN ISO 12100:2010-11
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 62233:2008/AC:2008
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This transfer is
carried out in agreement, in electronic or paper format.
The commercial protective rights remain unaffected by this.
Important note! The partially completed machine must not be put into operation, until, if
required, it has been determined that the machine in which the partially completed machine is to
be installed complies with the regulations of this guideline.
Stein am Rhein / 13/07/2017
Location / Date
Stein am Rhein / 13/07/2017
Location / Date
40
Directive 2014/35/EU of the European Parliament and of the Council
of 26 February 2014 on harmonisation of the laws of the member states
regarding the provision of electrical equipment designed for use within
certain voltage limits on the market
Published in L 96/357 from 29/03/2014
Electromagnetic compatibility – Requirements for household appliances,
electric tools and similar apparati – Part 1: Emission
Electromagnetic compatibility – Requirements for household appliances,
electric tools and similar apparati – Part 2: Immunity - Product family
standard
Safety of machinery – General principles for design – Risk assessment and
risk reduction (ISO 12100:2010)
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
harmonic current emissions (equipment input current <= 16 A per phase)
IEC 61000-3-2:2014
Electromagnetic compatibility (EMC) – Part 3- 3: Limits – Limits of voltage
changes, voltage fluctuations, and flicker in public low-voltage supply
systems for equipment with a rated current <= 16 A per phase and not
subject to conditional connection IEC 61000-3-3:2013
Process for measuring the electromagnetic fields of household devices and
similar electric devices with regard to the safety of persons in
electromagnetic fields (IEC 62233:2005, modified)
Signature
Signature
Technical Manager
Signatory's position
Managing Director
Signatory's position