Product Information; Mode Of Operation; Sizes And Versions; Sizes - Phoenix Mecano Alpha Colonne Notice D'assemblage

6.1 Mode of operation

The lifting column Alpha Colonne is used to adjust the height of tables or other adjustment tasks
of a comparable kind.
A tapped spindle drive is used to traverse the aluminium profiles guided within each other in the
lifting direction.
This movement is carried out using an installed DC motor.

6.2 Sizes and versions

This lifting column is available with internal and external controller.
The lifting column is supplied ready to use, without accessories.

6.2.1 Sizes

The lifting column is available in two sizes.
The sizes are differentiated in the dimensions of the profile cross-section and the fixing plates of
the lifting columns.
Both sizes are available with internal controller or external controller.
•
Alpha Colonne Medium (ACM)
Profile cross-section, maximum 128 mm
•
Alpha Colonne Medium (ACL)
Profile cross-section, maximum 163 mm

6. Product information

47