Declaration Of Incorporation; Declaration Of Incorporation For Alpha Colonne With External Controller - Phoenix Mecano Alpha Colonne Notice D'assemblage

1.1 Declaration of incorporation for Alpha Colonne with external
controller
As set out in Machinery Directive 2006/42/EC, Annex II, 1.B for partly completed machinery
The manufacturer
Phoenix Mecano Komponenten AG
Hofwisenstrasse 6
CH-8260 Stein am Rhein
confirms that the named product
Product/manufacture:
Type:
Project number:
Trade name:
Function:
complies with the requirements for partly completed machinery in accordance with EC Machinery
Directive 2006/42/EG.
The following basic requirements of Machinery Directive 2006/42/EC are fulfilled:
1.1.5., 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.9, 1.5.1, 4.1.2.1, 4.1.2.3
Moreover, we declare that the special technical documents have been created according to
Appendix VII Part B.
The manufacturer declares explicitly that the partially completed machinery meets all the relevant
provisions of the following EC directives and ordinances:
2011/65/EU
The person in the community that is authorised to compile the rele-
vant technical documents:
Dipl.-Ing. Michael Amon
RK Rose+Krieger GmbH
Potsdamer Str. 9
DE - 32425 Minden
Authorised representative:
RK Rose+Krieger GmbH
Potsdamer Str. 9
DE - 32425 Minden
External Alpha Colonne
Lifting column for external control
See type plate label
External Alpha Colonne
Electro-motorised extracting and retracting of the inner profile to produce
a linear movement
Directive 2011/65/EU of the European Parliament and of the Council of
8 June 2011 on the restriction of the use of certain hazardous substances
in electrical and electronic equipment.
Published in L 174/88 from 01/07/2011

1. Declaration of incorporation

37