HoMedics BPW-1005-EU Manuel D'instructions page 16

Table 4 For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
portable and mobile RF communications equipment and the [BPW-1005]
The [BPW-1005] is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the [BPW-1005] can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the [BPW-1005] as recommended below, according to
the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be determined using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
NOTE 1 At 80MHz and 800MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Recommended separation distances between
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
—
d = 1.2 √
P
0.12
0.38
1.2
3.8
12
16 16
80 MHz to 800 MHz
—
d = 1.2 √
P
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
—
d = 2.3 √
P
0.23
0.73
2.3
7.3
23
FLUCT
L'activit
ainsi qu
pressio
d'obten
La pres
appara
augmen
plupart
recomm
Des me
circulat
permet
identiq
Explica
respons
renvoye
revende
tout en
Directi
santé h
vous dé