3.
Fix the device with screws and anchor bolts.
4.
Refer to the side marks shown in figure A to align the holes in the sensor with the fasteners on the base. Insert the
sensor into the base.
5.
Turn the sensor clockwise to lock it as shown in figure B.
Maintenance
During normal operation, the detector can signal the need for maintenance by flashing the amber LED; a signal will also be sent
to the control unit. In this condition, the smoke detection chamber must be cleaned using a dry cloth or a thin brush to restore
proper operation. The maintenance frequency depends on the environmental conditions in which the detector is installed.
Hereby, URMET S.p.A. declares that the radio equipment type: SMOKE DETECTOR SD600 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.elkron.com.
CLICK ON THE FOLLOWING LINK OF THE ELKRON SITE TO ACCESS THE PRODUCT TECHNICAL SHEET AND
DOWNLOAD THE COMPLETE MANUAL:
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and
electronic equipment (WEEE).
The symbol of the crossed-out wheeled bin on the product or on its packaging indicates that this product must not be
disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment.
For more information about where you can drop off your waste equipment for recycling, please contact your local city office,
your household waste disposal service or the shop where you purchased the product.
(Figure A)
SIMPLIFIED EU DECLARATION OF CONFORMITY
ELKRON
Tel. +39 011.3986711 - Fax +39
011.3986703
www.elkron.com
– mail to: info@elkron.it
(Figure B)
ELKRON is a trademark of URMET S.p.A.
Via Bologna 188/C – 10154 Turin (TO) Italy
www.urmet.com
MADE IN TAIWAN