Control Panel - BORETTI BVW88 Notice D'utilisation

24
If the appliance is installed higher with a
flush kitchen furniture door, the optical
signal will not be visible.

Control panel

1 On/off button
2 Digital display
3
Programme selection button
4
Programme selection button
5
Half-load button
1)
Salt
1)
Rinse aid
End-of-programme
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while
a washing programme operates.
Digital display
The display shows:
• Adjusted level of the water softener.
• Activation/deactivation of the rinse aid dis-
penser (only with multitab function on).
• Number corresponding to the selected
washing programme.
• Remaining time to the end of the pro-
gramme.
• End of a washing programme.
• Number of hours in delay start.
• Fault codes.
• Activation/deactivation of the audible sig-
nals.
All manuals and user guides at all-guides.com
1
A
Indicator lights
Comes on when it is necessary to fill the salt container. Refer to 'Use of dish-
washer salt'.
After you fill the container, the salt indicator light can continue to stay on for
some hours. This does not have an unwanted effect on the operation of the
appliance.
Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of
rinse aid'.
Comes on when the washing programme is completed.
2 3 4
5 6
B C
10
6
Delay start button
7
Multitab button
8
Cancel button
9 Indicator lights
10 Function buttons
Programme selection buttons
With these buttons you can select the wash-
ing programme. Press one of these buttons
until the digital display shows the number of
the programme. Refer to 'Washing pro-
grammes' chapter for more data about the
washing programmes.
Half-load button
The half-load option is not available for all
washing programmes. Refer to the chapter
'Washing programmes'.
• Load dishes in the upper and lower bas-
ket.
8 9
7