Control Panel - BORETTI BVW 96 Notice D'utilisation

74

Control panel

1 On/off button
2 Programme selection buttons
3 Delay start button
4 Indicator lights
5 Function buttons
Delay start button
You can delay the start of the programme for
3, 6 or 9 hours.
Refer to 'Select and start a washing pro-
gramme' chapter for the set of this function.
Function buttons
The following functions can be set using
these buttons:
• adjustment of the water softener level,
• cancel a washing programme or a delay
start in progress,
• activate/deactivate the multitab function,
• activate/deactivate the rinse aid dispenser
when multitab function is active,
Indicator lights
Salt
Comes on when the special salt has run out.
Multitab
Indicates the activation/deactivation of the multi-
tab function. (Refer to 'Multitab function').
End of programme
Comes on when a washing programme has
ended. It also has added functions of visual sig-
nalling as:
– the setting of the water softener,
– activation/deactivation of the rinse aid dispens-
er,
– activation/deactivation of the audible signals,
– intervention of an alarm due to the malfunction
of the appliance.
• activate/deactivate the audible signals.
Setting mode
Press the on/off button. If all the programme
button lights come on, the appliance is in
setting mode.
The appliance must be in setting mode,
when performing the following operations:
• selecting a washing programme,
• setting the water softener level,
• activating/deactivating the rinse aid,
• activating/deactivating the audible signals,
Press the on/off button. If a programme but-
ton light comes on, the last performed or se-
lected programme is still set. In this case, to