Control Panel - BORETTI M-system MVW-651 Notice D'emploi

Control panel

1 On/Off button
2 Delay start button
3 Programme selection / Cancel button
4 Indicator lights
5 Programme lights
Programme lights A and B
In addition to the selection of the corre-
sponding washing programme, these lights
will also guide you in the following operations:
End
Rinse aid
Salt
Setting mode
Press the On/Off button; if ALL programme
indicator lights are off and the End indicator
light is flashing, the appliance is in setting
mode.
1 2
Indicator lights
Comes on when a washing programme has ended. It also has added func-
tions of visual signalling as:
– the setting of the water softener,
– deactivation/activation of the audible signals,
– intervention of an alarm due to malfunction of the appliance.
Comes on when the rinse aid has run out.
Comes on when the special salt has run out.
5
3
A B
– setting the water softener level,
– deactivating/activating the audible signals.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– deactivating/activating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button; if a programme in-
dicator light is on with a fixed light, the last
performed or selected programme is still set.
4
47