Summary Of Dc29160.Sys Command Line Switches; Frequently Asked Questions - Dawicontrol DC-29160 U3W Mode D'emploi

Manual

2. Summary of DC29160.SYS Command Line Switches

If you want to use the power save function or if problems should arise with special
configurations, various parameters can be transferred to the SCSI driver.
To do so, start the "REGEDT32" programme. The parameters for SCSI adapters
are attained by successively opening "HKEY_LOCAL_MACHINE", "SYSTEM",
"CurrentControlSet" and "Services". At this stage, open "DC29160" and select
"device". On the right half of the screen, an entry with the designation "DriveParameter"
will appear together with the current settings. By clicking on "DriverParameter", a
window to modify the parameters can be opened.
The following parameters are supported under Windows NT:
/PS=.. specifies the period of time (in minutes) after which inactive drives are to
be turned off.
VII.Appendix

1. Frequently Asked Questions

What information should I have handy when calling the support?
System type, main board and chip set specifications, the operating system used
(DOS Windows 3.x, Windows 95/98/ME, Windows NT 4/2000/XP, OS/2, Novell,
Linux), the SCSI host adapter used, list of all connected devices, SCSI bus length
(internal + external cable), copy of error messages, terminator placement, is the
configuration new or has it already been in operation, what changes were made
before it stopped operating. On first glance, this seems a lot, but this information
makes it a lot easier for us and yourself to identify the problems, as the questions
mentioned above are likely to come up in the course of the conversation.
- 55 -