Air Techniques ScanX Intraoral View Notice De Montage Et D'utilisation page 44

Usage
EN-
Reading the extraoral image plate
US
In order not to mix up X-ray images, only
scan the X-ray images from the selected
patient.
Remove the plate protector from the X-ray cas-
❯
sette.
Place the plate protector with the phosphor
❯
storage plate in the entry slot of the transport
arch.
40
CAUTION
Loss of image data caused by stray
ambient light entering the unit
Remove the intraoral/extraoral plate
❯
protector only after the phosphor stor-
age plate has dropped into the collect-
ing tray.
Place a finger on the printed surface of the
❯
phosphor storage plate and push downwards
until the phosphor storage plate is drawn in
automatically.
Scanning progress is displayed on the touch
screen. Image data is saved automatically.
The touch screen only shows a preview
as an initial impression of the X-ray image.
Limitations to image previews occur due
to image size and/or exposure conditions.
For purposes of diagnosis, the X-ray
image must be viewed on a diagnostic
monitor.
After it has been scanned, the phosphor storage
plate is erased and drops into the collecting tray.
Save the X-ray image.
❯
Remove the PSP and prepare it for recording
❯
another X-ray image.
Remove the plate protector.
❯
2151100018L40 2012V016