Installation; Requirements; Installation/Setup Room - Air Techniques ScanX Intraoral View Notice De Montage Et D'utilisation

Installation

EN-
Installation
US
Only qualified specialists or persons
trained by Air Techniques may install,
connect, and commission the unit.
6

Requirements

6.1

Installation/setup room

The room chosen for set up must meet the fol-
lowing requirements:
– Closed, dry, well-ventilated room
– It should not be a room made for another pur-
pose (e.g. boiler room or wet cell)
– Max. light intensity 1000 Lux, no direct sun-
light at the place of installation of the unit
– There should be no major fields of interference
(e.g. strong magnetic fields) present that can
interfere with the proper operation of the unit.
– Ambient conditions correspond to "4 Techni-
cal data".
– Installation location outside the vicinity of
patients
18 2151100018L40 2012V016