Installation
EN-
Attach the connector bar to the base plate
❯
using the screws.
US
Place the collector mat in the appropriate
❯
recess.
7.4
Removing the protective film
from the touch screen
Remove one corner of the protective touch
❯
screen film and peel it off carefully.
24
7.5
Attaching the Stylus
The Stylus is held on the unit by a magnet.
❯
Place the Stylus in the indentation provided.
7.6
Checking the memory card
NOTICE
Loss of image data due to unex-
pected insertion or removal of the
memory card
Insert or remove the memory card only
❯
when unit is switched off.
Checking proper insertion of the memory card
❯
in the unit. If the memory is inserted incorrectly
in the device, take it out again and re-insert it
properly.
2151100018L40 2012V016