Pan & Tilt Adjustments; Description Of The Zoom&Focus Adjustment By Joystick - Eneo IPD-72A0003M0A Mode D'emploi

Pan & Tilt adjustments
1. Pan limit: Pan is limited to +/- 173°. Do NOT force to rotate the gimbal over the
limit to prevent from the internal damage.
2. Tilt limit: Tilt is limited to 25° min ~ 90° max. with reference to the ceiling when
the inclination of camera module is 0°, that is, the image is aligned horizontally.
CAUTION: Tilt may NOT reach 25° min. if some IR light reflects
to the lens when the inclination is NOT 0°. When Tilt is set to
near the minimum limit, examine and verify that NO IR refection
occurs.
3. Inclination limit (Horizontal image alignment): Inclination limited to +/- 50° max.
CAUTION:
Extreme care should be taken NOT to scratch the bubble dome
surface while the camera installing or adjusting.
Care should be taken the cable is NOT to be damaged, kinked or
exposed in the hazardous area.
Tighten enough the dome cover fixing screws so that there
should be NO gap between Lens hood and clear bubble to avoid
the light inflow from IR LEDs.
Description of the ZOOM&FOCUS adjustment by joystick
1. ▲ : Zoom In
2. ▼ : Zoom Out
3. ◄ : Focus Near
8