Installation Examples - Heath Zenith SL-6050-WH Guide De Référence

Motion sensors can be mounted anywhere within 100 feet of the security light receivers. The motion sensors transmit an activation
signal 100 feet in all directions. So even if the motion sensor is not pointed toward the security light receiver, the security light will still
receive the signal.
200668-03

INSTALLATION EXAMPLES

• Motion sensor transmitters are battery operated and can
be mounted anywhere within 100 feet of a receiver.
• Possible mounting locations include: Fence posts, trees,
sheds, mailboxes, or walls.
13
• Security light receivers need 120V wiring to
operate.
• The YELLOW antenna wire must be straight-
ened out completely and placed inside the
wall or eave away from electrical wires.
• Lights can replace any existing exterior light.
• Lights can be installed anywhere there is 120V
power available.