The Sounddecoder; Br 10 002 Function Key Allocation (Delivery State); Locomotive Settings - Roco 10 002 Serie Manuel

▪ BR 10 002 function key allocation (delivery state)

The factory-set default adress of the lok is 03.
F-Key Function
Licht Front lightsr
F1 Travel sound
F2 Smoke generator + motor
F3 Two-tone whistle, long
F4 Circuit lighting
F5 Driver's cab lighting
F6 Shunting range + half speed
F7 Oil burner
F8 Rear light
F9 Coupling noise
F10 Conductor whistle
F11 Injector
F12 Two-tone whistle, brief
F13 Air pump
F14 Mute - key
F15 Drain

▪ Locomotive Settings

The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous deco-
der properties to your wishes however. Certain parameters (referred to as CVs – Con�guration Variable
– or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in the
decoder not reacting correctly.
The decoder is preprogrammed with 128/28 speed steps at the factory for a high level of comfort. This
means that it can be used together with all of the modern DCC ( multi MAUS/ multi MAUS
rola control devices.
2)
The Sounddecoder has been especially modi�ed for the additional functions and must not be
replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the programming
track.
8062192920.indd 25

The Sounddecoder

) and Moto-
pro
25
25
23.04.2012 08:12:23