Lubrication; Replacement Of Traction Tyres; Replacement Of The Carbon Brushes; Assembly - Roco 10 002 Serie Manuel

▪ Lubrication

▪ Replacement of traction tyres

▪ Replacement of the carbon brushes

In order to prevent damage caused by improper handling, please contact your Roco dealer or a specia-
list workshop.

▪ Assembly

Pay attention to the correct position of the contacts during assembly.
8062192920.indd 23
Only apply small oil droplets onto the positions
as marked in the lubrication plan. We recommend
ROCO oiler Art. No. 10906.
In order to lubricate the transmission parts (gear
wheel, screw), we recommend using ROCO spe-
cial grease 10905. If lubricated, do not oil these
parts.
Pay attention to the original position of the wheel
contacts prior to removing the axles.
Remove the traction tyres using a needle or a thin
screwdriver. When applying the new traction tyres,
please ensure that they do not rotate.
23
23
23.04.2012 08:12:12