DRAMINSKI Twist Grain pro Mode D'emploi page 24

The moisture measurement result is presented taking into
account the corrections connected with the temperature
of the sample (automatic temperature compensation),
g) when the measurement is finished, untwist the tighten-
ing cap and empty the measuring chamber You need
to do it carefully so that not to cause any mechanical
damage to the temperature sensor which is at the bot-
tom Since the measuring chamber is empty, the device
is ready for further operation In order to perform meas-
urements of another sample of the same species, fill the
measuring chamber again and twist the cap proper-
ly Then start the measurement with the
(or with the help of the
to select another species)
NOTICE! Proper cleaning of the measuring chamber
is very important when you change the species of
the sample and when you measure the samples with
different and increased humidity,
h) the final result of the moisture of the given sample
is the average of, let's say, last three measurements
button
button go back to the list
The TG pro calculates it automatically and shows on the
left side of the display (below the temperature result),
for example:
TG pro
Canola
9.9%
9.7 %
21.6 C
Esc Clr Start
The number of measurements from which the average is
calculated can be changed in the main menu The results
above and below the range are not taken into account
when the average is calculated If you want to calculate
the average result from the beginning, you can clear it
(function Clr) with the help of the
to the list of the species with the help of the
i) The Twist Grain pro enables saving of 50 thousands of
measurements to the internal memory of the device with
button (function Mem) In order to use
the help of the
it, go to the main menu and change to "advanced" mode
Additionally, the user can choose if they want to save the
current result of the average of the last measurements
CHAPTER 6 | HUMIDITY MEASUREMENTS
EN
button or go back
button,
23