DRAMINSKI Twist Grain pro Mode D'emploi page 16

NOTICE! If the batteries are too low to carry on operating,
the device automatically signals it with the following
message:
TG pro
Change batteries
It means that the batteries have to be replaced by new
ones
c) in order to save the source of power supply, when the
keys are not used, the devices turns to stand-by mode
after a certain time, it means that the display turns
black (this time can be set in the menu, see chapter:
MAIN MENU) Pressing on any key causes that the
device gets to operating mode again,
d) if the TG pro is in stand-by mode for a few minutes,
it will be turned off automatically (this time can be set
in the menu, see chapter: MAIN MENU) The device
will signal this by turning on the display and there
appears a countdown from 10 to 0, which can be
aborted by any button However, if you do not do it,
the device will turn off automatically in order to save
the source of energy, for example:
TG pro TG pro
Power o in 5
e) in order to turn off the device, hold the
for 5 seconds or from the position of the MAIN MENU
choose option "Turn off!"
f) during the measurements, in the lower part of the dis-
play you see the cues what a certain button of the mem-
brane keyboard is responsible for, for example:
CHAPTER 4 | HOW TO START THE DEVICE
Power o in 1
button
15
EN